+65 9727 3073 sales@iscientific.com.sg

MGS-550 Refrigerant / Gas Detector

MGS-550 Refrigerant / Gas Detector

The MGS-550 can easily be connected to any central BMS control system (via Modbus connection) or, with its three onboard user-assignable relays, can easily function as a stand-alone unit without the need to wire alarm devices back to a central system.


 

Providing the ultimate in flexibility, the instrument can be upgraded at any time from a one-sensor unit to a two-sensor system by simply installing another sensor. Both analog outputs can be assigned as either redundant or specific for each of the sensors. The simple, single level menu interface throughout the MGS-550 platform significantly reduces the amount of training required for maintenance and installation.

 


  • Flexible One or Two-Sensor Capability
  • Remote Sensor Options for Direct Monitoring in Any Environment
  • Analog and Modbus Interface
  • Three User-Assignable Relays for Enhanced Safety
  • Magnetic Wand Enables Easy, Non-Intrusive Adjustments/Calibration
  • 3 Status Indicators and 5-Digit Numeric LED Display

The new gas detector / gas transmitter MGS-550 is a flexible-platform instrument that is easily customized for a wide variety of challenging applications.


The advanced MGS-550 gas detector series is user-configurable and can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. It can detect an extensive range of refrigerants, combustible and toxic gases.


  • Following is a list of gases (excerpt) that can be detected:

    R22 0 – 1000 ppm or 0 – 10000 ppm

    R32 0 – 1000 ppm or 0 – 10000 ppm

    R134a 0 – 1000 ppm or 0 – 10000 ppm

    R404a 0 – 1000 ppm or 0 – 10000 ppm

    R407a 0 – 1000 ppm or 0 – 10000 ppm

    R407c 0 – 1000 ppm or 0 – 10000 ppm

    R407f 0 – 1000 ppm or 0 – 10000 ppm

    R410a 0 – 1000 ppm or 0 – 10000 ppm

    R422 0 – 1000 ppm or 0 – 10000 ppm

    R422d 0 – 1000 ppm or 0 – 10000 ppm

    R427a 0 – 1000 ppm

    R448a 0 – 1000 ppm

    R449a 0 – 1000 ppm

    R452a 0 – 1000 ppm

    R507 0 – 1000 ppm or 0 – 10000 ppm

    R513a 0 – 1000 ppm

    HFO1234YF 0 – 1000 ppm

    HFO1234ZE 0 – 1000 ppm or 0 – 10000 ppm

    NH3 Ammonia 0 – 100 ppm or 0 – 1000 ppm or 0 – 5000 ppm or 0 – 10000 ppm or 0 – 100 % LEL

  • R290 0 – 5000 ppm

    R600 0 – 5000 ppm

    CH4 Methane 0 – 5000 ppm or 0 – 100 % LEL

    C2H4 Ethylene 0 – 2000 ppm

    CO2 Carbon Dioxide 0 – 5000 ppm or 0 – 10000 ppm or 0 – 20000 ppm or 0 – 30000 ppm or 0 – 40000 ppm or 0 – 50000 ppm

    C4H10 Butane 0 – 100 % LEL

    C3H8 Propane 0 – 100 % LEL

    CO Carbon Monoxide 0 – 1000 ppm

    O2 Oxygen 0 – 30 Vol. %

    LPG 0 – 100 % LEL

    NO2 Nitrogen Dioxide 0 – 20 ppm


 

Sensor: Semiconductor, Electrochemical, Infrared or Catalytic Bead sensor

Number of Sensors: 1 or 2

Type of Sensors: Remote or integrated into the enclosure

Type of Enclosure: Standard: IP66; ABS; 4 x M20x1.5 ports

Power Supply: 19.5 – 28.5 VDC or 24VAC +/- 20%; 3 or 4 wire

Display:  5-digit, 7-segment red LED and green status LEDs

Analog Output: 4 – 20mA /  0 – 5 V / 0 – 10 V / 1 – 5 V / 2 – 10 V

Digital Output: MODBUS RTU via RS485

Relay:  3 relays; SPDT; user assignable

Rating: 1A @ 24VDC; 0.25A @ 240VAC; resistive load

Alarm delay: 0 – 15 minutes; user programmable

Temperature Range: -40°C to +50°C

Humidity Range: 5-90 % rh, non condensing

Altitude: up to 3050m

Dimensions: Standard: 210 x 225 x 85 mm

Weight: Standard: 1 kg

IMR Environmental Equipment, Inc. reserves the right to adopt technical modifications without prior notice.

 


Included :

  • Gas Detector MGS-550
  • Manual

× Whatsapp